12V/24V RF Controller & Touch Remote – RGB LED Flex

Description

The Knightsbridge LEDFRA9 is a 12V/24V RF controller for RGB LED flex strip installations, supplied with a wireless touch panel remote. The controller outputs up to 216W at 12V or 432W at 24V across three channels (R/G/B), allowing control of up to 18A total current depending on voltage. The touch remote operates via RF signal with a detection range of up to 20 metres through walls and ceilings.

Designed for domestic and light commercial RGB LED flex installations, the controller sits between the 12V or 24V DC power supply and the LED strip run, handling colour mixing, brightness dimming and dynamic RGB transitions. The touch panel remote features an on/off toggle, colour wheel for direct colour selection, and brightness controls. The controller supports smooth colour transitions between programmed scenes and fade effects.

The controller measures 84mm wide by 81mm long by 32mm high and mounts to a wall or inside a ceili